Springs 3-piece

Wooden feather wall decor

Feather 3-piece consists of three graphic feathers. The geometric lines in the feathers give the design a modern look, while the shape remains light and airy.

Each set is water-jet cut to order in the Netherlands. You choose the size and the material: natural poplar plywood or black MDF. We apply the mounting tape to the back of each panel beforehand, so you can hang the set without any drilling or screws.

Why this design

• Geometric and natural. A natural shape built from clean lines. This makes it suitable for both modern and natural interiors.
• Portrait format. The set is taller than it is wide, making it suitable for narrower walls as well.
• Three sizes. From 47 to 79 cm wide, suitable for narrow or wide walls.
• Hang without drilling. The mounting tape is already attached. You don't need to cut or stick anything yourself.

Choose your material

Natural poplar plywood (9 mm)
Light wood with a natural grain. It is supplied untreated. Leave it natural for a warm accent, or paint or stain it yourself in a color that matches your interior.

Black MDF (8 mm)
The MDF is black throughout, so the cut edges are also black. The lines of the feathers stand out most sharply against a white, beige, or light grey wall. Ready to hang immediately.

Available sizes

• Small, 47 × 50 cm. A compact size for a narrower wall, above a desk or nightstand.
• Medium, 61 × 65 cm. Suitable above a sideboard, bed, or TV stand.
• Large, 79 × 75 cm. For a wide wall, above a sofa, bed, or dining table.

Dimensions are width × height of the complete set. Not sure which size fits best? Mark the outer dimensions of the set on the wall with painter's tape. This way you can see how much space the set will take up in advance.

Hang without drilling

The double-sided Tesa Powerbond Ultra Strong mounting tape has already been applied by us to the back of each panel. You do not need a drill, screws, or wall plugs.

1. Clean the wall. Choose a smooth, firm spot and ensure the surface is clean, dry, dust-free, and grease-free.
2. Determine the position. First, lay the panels out in the correct order on the floor. Then hold them against the wall, check the height and alignment, and make light pencil marks. Leave about 2 to 3 cm of space between the panels.
3. Remove foil and press. Work panel by panel: remove the protective foil and press the panel firmly against the wall over the entire surface.

Pay attention to the surface: The tape is intended for a smooth, firm, clean, and dry surface. Avoid rough textures, loose wallpaper, damp or powdery walls, and poorly adhering layers of paint. Check the position carefully in advance. Residue or damage may remain when removing the permanent tape.

Check the position carefully before pressing. You will find our hanging guide with these steps in the box.

Delivery

We only make your wall decor after you place your order. You will receive the set within 3 to 7 working days. After dispatch, you will receive a track-and-trace code by email. Shipping within the Netherlands and Belgium is free for orders over €100.

What do you receive?

• Three panels of Feather 3-piece in the chosen size and material
• Mounting tape, pre-applied to the back of each panel
• Hanging guide with installation instructions

Product specifications

Where does this set look best?

Next to a cabinet, above a desk or nightstand, or in the hallway. Due to the portrait format, it also works well on a narrow wall.