Tree faces 3-piece

Tree Faces wooden wall decor

The 3-piece Tree Faces design shows two faces formed by the branches of a tree. At first glance, you see a tree; look a little longer, and you will see the two faces within the branches.

Each set is water-cut to order in the Netherlands. You choose the size and the material yourself: natural poplar plywood or black MDF. We apply mounting tape to the back of each panel beforehand, so you can hang the set without drilling or screws.

Why this design

• A design with a second layer. The design reads as a tree first and only later as two faces. That makes it a conversation piece on the wall.
• Organic lines. The flowing branch structure adds character without making the design look cluttered.
• Three sizes. From 80 to 130 cm wide, suitable for a narrow or a wide wall.
• Hang without drilling. The mounting tape is already attached. You don't need to cut or stick anything yourself.

Choose your material

Natural poplar plywood (9 mm)
Light wood with a natural grain. It is delivered untreated. Leave it natural for a warm accent, or paint or stain it yourself in a color that suits your interior.

Black MDF (8 mm)
The MDF is black through and through, so the cut edges are also black. The branches and faces stand out most sharply against a white, beige, or light gray wall. Ready to hang immediately.

Available sizes

• Small, 80 × 45 cm. A compact size for a narrower wall, above a desk or nightstand.
• Medium, 105 × 60 cm. Suitable above a sideboard, bed, or TV cabinet.
• Large, 130 × 75 cm. For a wide wall, above a sofa, bed, or dining table.

The dimensions are the width × height of the complete set. Not sure which size fits best? Use painter's tape to mark the outer dimensions of the set on the wall. This way, you can see in advance how much space the set will take up.

Hang without drilling

The double-sided Tesa Powerbond Ultra Strong mounting tape has already been applied to the back of each panel by us. You do not need a drill, screws, or wall plugs.

1. Clean the wall. Choose a smooth, solid spot and ensure the surface is clean, dry, dust-free, and grease-free.
2. Determine the position. Place the panels in the correct order on the floor first. Then hold them against the wall, check the height and alignment, and make light pencil marks. Keep about 2 to 3 cm of space between the panels.
3. Remove foil and press on. Work panel by panel: remove the protective foil and press the panel firmly against the wall over the entire surface.

Pay attention to the surface: The tape is intended for a smooth, solid, clean, and dry surface. Avoid rough textures, loose wallpaper, damp or powdery walls, and poorly adhering paint layers. Check the position carefully beforehand. Removing the permanent tape may leave residue or cause damage.

Check the position carefully before pressing. You will find our hanging guide with these steps inside the box.

Delivery

We only make your wall decor after you have placed your order. You will receive the set within 3 to 7 working days. After shipment, you will receive a track-and-trace code via email. Shipping within the Netherlands and Belgium is free for orders over €100.

What do you receive?

• Three panels of the 3-piece Tree Faces in the chosen size and material
• Mounting tape, pre-applied to the back of each panel
• Hanging guide with mounting instructions

Product specifications

Where does this set look best?

Above a sideboard, sofa, or bed. The design looks best on a free wall, without other decorations around it.