Tree with Birds 3-piece

Tree with birds wooden wall decor

Tree with Birds 3-piece is a graphic tree with birds in the branches, divided across three panels. The tree provides tranquility, while the birds bring life to the design.

Each set is water-cut to order in the Netherlands. You choose the size and material yourself: natural poplar plywood or black MDF. We apply the mounting tape to the back of each panel in advance, so you can hang the set without any drilling or screws.

Why this design

• Life in the branches. The birds in the tree give the design a playful detail without making it look cluttered.
• Separate panels, one image. You hang the three panels with a small gap between them. Together, they form a single composition with rhythm and depth.
• Three sizes. From 79 to 125 cm wide, fitting for either a narrow or a wide wall.
• Hang without drilling. The mounting tape is already attached. You don't need to cut or stick anything yourself.

Choose your material

Natural poplar plywood (9 mm)
Light wood with a natural grain. It is supplied untreated. Leave it natural for a warm accent, or paint or stain it yourself in a color that suits your interior.

Black MDF (8 mm)
The MDF is black throughout, so the cut edges are also black. The tree and birds stand out most sharply against a white, beige, or light gray wall. Ready to hang immediately.

Available sizes

• Small, 79 × 50 cm. A compact size for a narrower wall, above a desk or nightstand.
• Medium, 102 × 65 cm. Suitable above a sideboard, bed, or TV cabinet.
• Large, 125 × 79 cm. For a wide wall, above a sofa, bed, or dining table.

The dimensions are width × height of the complete set. Unsure which size fits best? Mark the outer dimensions of the set on the wall with painter's tape. This way, you can see in advance how much space the set will take up.

Hang without drilling

The double-sided Tesa Powerbond Ultra Strong mounting tape has already been applied by us to the back of each panel. You do not need a drill, screws, or wall plugs.

1. Clean the wall. Choose a smooth, firm spot and ensure the surface is clean, dry, dust-free, and grease-free.
2. Determine the position. First, lay the panels in the correct order on the floor. Then hold them against the wall, check the height and alignment, and make light pencil marks. Keep a space of approximately 2 to 3 cm between the panels.
3. Remove foil and press on. Work panel by panel: remove the protective foil and press the panel firmly against the wall over its entire surface.

Pay attention to the surface: The tape is intended for a smooth, firm, clean, and dry surface. Avoid rough textures, loose wallpaper, damp or powdery walls, and poorly adhering paint layers. Check the position carefully beforehand. When removing the permanent tape, residue or damage may remain.

Check the position carefully before pressing. Inside the box, you will find our hanging guide with these steps.

Delivery

We only make your wall decor after you have ordered. You will receive the set within 3 to 7 working days. After shipment, you will receive a track-and-trace code by email. Shipping within the Netherlands and Belgium is free for orders over €100.

What do you receive?

• Three panels of Tree with Birds 3-piece in the chosen size and material
• Mounting tape, pre-applied to the back of each panel
• Hanging guide with assembly instructions

Product specifications

Where does this set look best?

Above a bed, sofa, or sideboard, or in a nursery or hallway. Natural poplar gives a warm, natural look, while black MDF provides a sleek contrast on a light wall.