3-Piece Flower Set

Botanical wooden wall decor

Flower Set 3-piece is a botanical composition of graceful branches with flowers, divided across three panels. Subtle and refined, with enough detail to fill a wall.

Each set is water-cut to order in the Netherlands. You choose the size and the material: natural poplar plywood or black MDF. We pre-apply mounting tape to the back of each panel, so you can hang the set without drilling or screws.

Why this design

• Botanical branches. Thin branches with flowers give the design a refined appearance that fits perfectly in a tranquil interior.
• Separate panels, one image. You hang the three panels with a small gap in between. Together, they form a single composition with rhythm and depth.
• Three sizes. From 64 to 140 cm wide, suitable for both a narrow and a wide wall.
• Hang without drilling. The mounting tape is already attached. You do not need to cut anything to size or apply anything yourself.

Choose your material

Natural poplar plywood (9 mm)
Light wood with a natural grain. It is supplied untreated. Leave it natural for a warm accent, or paint or stain it yourself in a color that matches your interior.

Black MDF (8 mm)
The MDF is black all the way through, so the cut edges are also black. The branches and flowers stand out most sharply against a white, beige, or light gray wall. Ready to hang immediately.

Available sizes

• Small, 64 × 30 cm. A compact size for a narrower wall, above a desk or nightstand.
• Medium, 96 × 45 cm. Suitable above a sideboard, bed, or TV cabinet.
• Large, 140 × 65 cm. For a wide wall, above a sofa, bed, or dining table.

The dimensions are width × height of the complete set. Are you unsure which size fits best? Mark the outer dimensions of the set on the wall with masking tape. This way, you can see in advance how much space the set will occupy.

Hang without drilling

The double-sided Tesa Powerbond Ultra Strong mounting tape has already been applied by us to the back of each panel. You do not need a drill, screws, or wall plugs.

1. Clean the wall. Choose a smooth, firm spot and ensure the surface is clean, dry, dust-free, and grease-free.
2. Determine the position. First, lay the panels out in the correct order on the floor. Then hold them against the wall, check the height and alignment, and make light pencil marks. Keep about 2 to 3 cm of space between the panels.
3. Remove the film and press. Work panel by panel: remove the protective film and press the panel firmly against the wall over the entire surface.
4. Note on the surface: The tape is intended for a smooth, firm, clean, and dry surface. Avoid coarse textures, loose wallpaper, damp or powdery walls, and poorly adhering paint layers. Check the position carefully beforehand. Residue or damage may remain when removing the permanent tape.

Check the position carefully before pressing. In the box, you will find our hanging guide with these steps.

Delivery

We only produce your wall decor after you have ordered. You will receive the set within 3 to 7 business days. After shipping, you will receive a track-and-trace code by email. Shipping within the Netherlands and Belgium is free for orders over €100.

What will you receive?

• Three panels of the Flower Set 3-piece in the chosen size and material
• Mounting tape, pre-applied to the back of each panel
• Hanging guide with assembly instructions

Product specifications

Design	Botanical branches with flowers divided over three panels
Material	Natural poplar plywood or black MDF
Thickness	9 mm (poplar) or 8 mm (MDF)
Finish	Poplar untreated, MDF black throughout
Sizes	64 × 30, 96 × 45, or 140 × 65 cm (complete set)
Number of parts	3 panels
Production	Water-cut to order in the Netherlands
Mounting	Pre-applied mounting tape
Surface	Smooth, firm, clean, and dry
Delivery time	3 to 7 business days
Trial period	30 days

Where does this set look best?

Above a bed, sideboard, or sofa. Natural poplar gives a soft, natural look; black MDF makes the thin branches stand out the most clearly.